PART VIII MACHINERY AND EQUIPMENT — Conveyor standards
100
(1) Except as otherwise provided in these regulations, a conveyor shall meet the requirements of ANSI Standard ANSI /ASME B20.1-1993 "Safety Standards for Conveyors and Related Equipment" .
100(2)
A conveyor shall have guards or sideboards to prevent material from falling from the conveyor into areas occupied by workers where the falling material creates a risk of injury.
100(3)
A conveyor shall have an emergency stopping system except where worker access to the conveyor is prevented by guarding.
100(4)
Where a conveyor emergency stopping system uses a pull wire, the system shall activate by a pull of the wire in any direction, or by a slack cable condition.
100(5)
A conveyor emergency stopping system shall be designed and installed so that after an emergency stop manual resetting is required before the conveyor can be restarted.
100(6)
A conveyor shall not be restarted after an emergency stop until inspection has determined it can be operated safely.
Not legal advice. Verify the cited article against the signed agreement.