PART VIII MACHINERY AND EQUIPMENT — Automotive lifts and vehicle supports
110(4)
The employer shall keep a maintenance and inspection record for each automotive lift or hoist for not less than 5 years.
110
(1) An automotive lift or hoist shall meet the requirements of ANSI Standard ANSI / ALI ALCTV-2006 "American National Standard for Automotive Lifts -- Safety Requirements for the Construction, Care, and Use" .
110(2)
A shop crane, jack, axle stand, ramp or other type of vehicle support shall meet the requirements of the applicable section of ANSI Standard ASME PALD-2005 "Safety Standard for Portable Automotive Lifting Devices" .
110(3)
Operation, inspection, repair, maintenance and modification of a vehicle support or lift shall be carried out according to the manufacturer's instructions or the written instructions of a professional engineer.
110(5)
The rated capacity shall be marked on each automotive lift or hoist, shop crane, jack, axle stand, ramp or other vehicle support and shall not be exceeded.
110(6)
The control for an automotive lift shall require continuous pressure by the operator when raising or lowering the unit, and the control shall return to the neutral position when released.
Not legal advice. Verify the cited article against the signed agreement.