PART XXIX UNDERGROUND OPERATIONS — Raise climbers
555
An employer shall ensure that a raise climber or other hoisting device referred to in section 554 is equipped with
555(a)
at least 2 independent means of braking,
555(i)
each of which is capable of stopping and holding the climber with its maximum rated load, (ii) each of which is arranged to permit independent testing, and (iii) one of which is as close as practicable to the final drive of the motor; a suitable emergency switch in the cab that cuts off the power to the drive motors in the event the main control contactor fails to open, and (ii) a means by which the power can be isolated from the raise service area; and
555(b)
an automatic overspeed brake to safely decelerate and hold the climber in the event of the climber travelling at a speed in excess of a predetermined rate;
555(c)
a notice attached to the conveyance showing the maximum load that can be carried, as certified by the manufacturer;
555(d)
when driven by electrical power,
555(e)
a suitable headcover after 8 metres of advance.
Not legal advice. Verify the cited article against the signed agreement.